There are many mistakes individuals can make when installing their own air conditioner or trying to solve aircon issues themselves.

These mistakes can lead to a multitude of problems that can cause a negative domino effect, creating additional issues and leading to a more expensive power bill.

One example is that parts could be connected incorrectly such as the physical wall mounting components, causing the AC to drop, or the wiring or piping could be connected incorrectly, which could cause a number of efficiency issues.

If you need help installing or repairing your air conditioning or you’re experiencing issues with your current system, you need to contact Tri-Tech Air Conditioning and Electrical for the best aircon installation in Brisbane!

How do I know if my AC is broken?

Whether you have a large HVAC system that connects to multiple rooms of your house, workplace, or commercial site, or your air conditioning Brisbane is a single unit for one room in your home – you shouldn’t do maintenance yourself or choose an unqualified contractor.

If your air conditioning isn’t working efficiently, isn’t turning on, or is making strange noises, there’s an underlying issue we need to solve.

A lot of brands, such as Daikin service, have a pre-programed system in their remotes in which you can diagnose the problem from your own home so that when you call up a technician, you can better explain why your air conditioning isn’t working.

You can always call an air conditioning expert if you are unsure what the problem is. Your air conditioning might just have a clogged pipe, clogged filter or it’s just old.

What are common problems with air conditioners?

Air conditioners have many parts, and any one of them (or more) could be causing problems. These parts include:

• Fan motor
• Thermistor
• Printed Circuit Board (PCB)
• Compressor motor
• Drain pump
• Humidifier
• Power transistor

A fault within one or more of these elements could be exacerbated from trying to install or fix an air conditioner yourself or choosing unlicensed contractors to perform the work for you.

Incorrect installation may lead to a host of issues, such as:

• The duct installations being wrong or not sealed properly
• Bad insulation, leading to dripping water and stains
• Exposed or badly installed wires
• Choosing the wrong size unit for your property and space
• Leaks of coolant, water, or refrigerant or the wrong levels of these

What is the problem when the air conditioner is not cooling?

One of the most common problems with air conditioning is that there’s complete air failure or it doesn’t cool your space down in the way you require it to.

There are a multitude of faults that could be causing this issue such as:

• You have a faulty fan motor
• Defective connector of harness/connector between the fan motor and PCB
• Fan motor isn’t turning because something is in the way
• Defective indoor unit PCB
• Broken wires on the fan motor harness

Common logistical problems

The position of the air conditioning is crucial to its efficiency, yet often this gets overlooked by those that buy and install the AC themselves.

For its internal position, a lot of homeowners will immediately want to place it in a location where nobody will see or notice it because exposing it can alter the aesthetic of your home like a ducted air conditioning brisbane.

This isn’t necessarily the best placement, because of its distance, its cooling effects will take longer to reach people. The consequence of this is that it will need to be active for longer and on a higher setting.

This will use more energy, increase your bills, wear your unit faster, and overall cost more money.

Most air conditioners will have external parts that go outside your home, like the condenser unit.

Depending on the system you get installed, the condenser unit will have to be at a certain distance from the internal unit. Therefore, you need to consider the room it will take up outside and how it will affect the atmosphere of your outside gatherings or if it gets in the way of walking spaces.

Another potential issue when placing and putting together an air conditioner is you could be putting strain or pressure on an internal part of the air conditioning. This can cause it to wear down faster over time.

Who can I trust to service or install my air conditioning?

Even professional electricians might not have the right experience to repair or install your air conditioning like split system installation.

There are many types of electricians and plumbers, and many of them may offer air conditioning installation and repairs on top of their standard services.

However, in our experience, while these professionals have the knowledge, they often don’t have the same intricate training and experience a dedicated air con expert does in dealing with all kinds of systems in all kinds of properties.

So when looking for an air conditioning expert, make sure they tick the following boxes:

• Licensed and registered professionals
• ARKtick registered
• QBCC registered
• Have extensive experience
• Can present your contract and warranty in writing
• Offer aircon installment payments
• Licensed warranty agents
• Offer long-term support and service

Contact an air con expert today!

From services in Murarrie to air conditioning repairs in Coorparoo, Tri-Tech’s qualified team performs a range of air conditioning services across greater Brisbane.

So if you need help with anything air conditioning related, we cover all brands – and we’re also proud to offer ongoing service and support, such as Mitsubishi Electric Aircon tech support.

We tick all the boxes and more! To discover the Tri-Tech difference, we invite you to get in touch with us today.

Call us on (07) 3394 0222 or fill in this form to contact us online.